BATTERIES
Charging the Spare Battery Pack
The Spare Battery Charging Compartment is located in the base cradle. You can use the spare battery pack to replace the current handset battery pack right away if it becomes depleted. The spare handset battery pack is optional, and must be purchased separately.
1Open the battery door on top of the base cradle by lifting the latch on top.
2Insert the battery. The SPARE BATT CHARGING light goes on.
3Replace the battery door. The spare battery will be charged in about 24 hours.
Replacing the Handset Battery Pack
1Remove the battery cover by pressing on the indentation and sliding downward.
2Lift out the old battery pack.
3Install the new battery pack so that the metal contacts on the bottom of the battery are aligned with the charging contacts in the battery compartment.
4Replace the battery cover by sliding it on its track up over the battery compartment until it snaps firmly in place.
5The new battery pack must be charged before using this telephone. Place the handset in the base and allow it to charge for 16 hours. Your telephone might operate before that, but for best performance, let the handset battery pack charge fully.
Charging the spare battery pack | Replacing the handset battery pack |
16
Lucent 9125 book.L1 | 16 | 4/8/98, 11:25 AM |