Call Back

USING YOUR FP101

When the party you are calling is engaged or doesn’t answer, hang up.

Pick up the handset, then press the button.

The telephone will automatically dial the access code *’51’ to enable the ‘auto callback’ feature. Listen for an interrupted dial tone and hang up.

Telecom’s ‘auto callback’ Service will automatically ring you with a distinctive ringing tone. Your ‘call back’ will go through as soon as you pick up your hand- set, and you will hear the standard ringing tone.

You can apply up to 3 ‘auto callbacks’ at one time by repeating this procedure. ‘Auto callback’ will monitor the number for 30 minutes - if the callback is not successful within this time, it will be cancelled automatically.

‘Auto callback’ will only call you once. If your line is busy or you do not answer, ‘auto callback’ will be cancelled automatically.

If ‘auto callback’ cannot work for that number, you will hear an unobtainable tone (pip-pip-pip-pip-pip)

NOTE: Call Minder, Call Diversion, Call Waiting and Auto Callback are all network services

provided by Telecom New Zealand Limited.

They are all subscription services, and may not be available to all customers in all areas. To subscribe to any of these services, or check on the availability for you in your area, please contact Telecom Residential Sales and Service on ‘123’ or Telecom Business on ‘126’.

NOTE: If you do not want to use the above services, simply turn over the memory card and

program any or all of the 20 speed dial buttons to your own requirements.