Uniden FP100 manual Installation, Wall Mounting

Page 12

INSTALLATION

INSTALLATION

WALL MOUNTING

You can mount your phone directly on a wall. Before mounting your phone, consider the following:

Select a location away from electrical cables, pipes or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

Make sure the wall material is capable of supporting the weight of the Telephone.

Use the screws (supplied) with anchoring devices suitable for the wall material where the Telephone will be placed.

1.Insert two mounting screws 85mm apart. Allow about 5mm between the wall and screw heads for mounting the phone.

2.Gently pull and turn the Handset Retainer Tab 180° and release.

3.Fit the Wall Mounting Bracket to the Bottom of the telephone as shown.

4. Place the Base Unit on the screws and push down until it’s firmly seated.

12

Image 12
Contents FP100 Introduction Contents This page intentionally left blank Important Information Important Information Important NotesCaring for Your Telephone Please Read Before USEParts Checklist For New Zealand Model Parts Checklist PlugFeatures & Functions Features & Functions Features & FunctionsInstallation Handset Cord ConnectionTelephone Line Cord Connection Installation Wall MountingUsing Your FP100 Memory Dial NumbersStoring ONE-TOUCH Speed Dial Memories Using Your FP100 PauseChain Dialing Adjusting the Ringer Volume Control Adjusting the Ringer Tone ControlLED Indicators Placing a Telephone Call RedialReceiving a Telephone Call Troubleshooting Australia 1800 632Specifications Specifications for New Zealand ModelSpecifications for Australian Model Warranty One-Year Limited WarrantyYOU