Uniden FP204 manual Connecting Line Cords and AC Adaptor, Setting Time and Date

Page 4

If using the AC Adaptor, Batteries are not required for normal operation.

Always ensure telephone cord is disconnected before opening the battery compartment door and installing batteries.

Connecting Line Cords and AC Adaptor

1.Plug one end of the supplied telephone cord into the telephone line socket located at the rear of the phone.

2.Plug the other end into the telephone line wall jack.

3.Plug the AC Adaptor lead into the power socket at the rear of the phone.

4.Plug AC Adaptor into a standard wall outlet and switch it on.

Setting Time and Date

If you subscribe to a Caller ID Service, your time and date will automatically be set for you when you receive your first call to this unit.

1.

Press and hold

FLASH , display shows SET TIME.

2.

Use

and

to select the correct number, press DIAL to confirm and move

 

to the next digit, HH:MM DD/MM.

3.

Press

DEL to exit.

OPTIONAL BACKUP BATTERY INSTALLATION

Batteries may be used instead of the supplied AC Adaptor.

1.Remove the battery compartment cover.

2.Fit 4 x AAA alkaline batteries.

3. Replace the cover.

Based on ½ hour use per day, good alkaline batteries should last 2-3 months.

 

Battery

4x AA Batteries

Compartment

Image 4
Contents FP204 Contents Setup Location of ControlsConnecting Line Cords and AC Adaptor Setting Time and DateDigit Insert 0 Caller ID New ZealandRing Volume Hi/Lo/Off Handset Volume Hi/LoSpeaker Volume Ring Pitch Hi/LoDisplay Messages Caller ID Caller ID OperationSpeed Dial Numbers PhonebookStoring One-Touch Speed Dial Numbers Dialing One-Touch NumbersTroubleshooting Warranty One Year Limited WarrantyThank YOU