Uniden EXAI2248 series manual Charging the Battery

Page 6

QUICK REFERENCE GUIDE

Step 1 Charging the Battery

TO INSTALL THE HANDSET BATTERY

1

Remove the cover.

 

Connect the

2

battery pack

 

connector with the

 

correct polarity.

3

Replace the cover.

TO PLUG INTO AC POWER

1

Plug the AC adapter cord into the base

unit and then into a 120V AC outlet.

2 Place the handset on the base.

Note: You must charge the battery continuously for 15 - 20 hours before using the phone.

Step 2 Connecting

CONNECT TO A PHONE LINE

When the handset battery pack is fully charged, after 15-20 hours of charging, plug the telephone cord into the base unit and then into a telephone wall jack.

Your phone is set for tone dialing. If your local network requires pulse dialing, please see “Choosing the dial mode” on page 17.

Step 3 Setting Up the Caller ID/Language

Note: Three Caller ID options are available: AutoTalk, Caller ID on Call Waiting (CIDCW), and Area Code.

TO CHANGE CALLER ID OPTIONS

1

Press call id/menu.

2

Press

or

to move the pointer to

 

an option.

 

3

Press select to change the option

setting.

 

 

4

Press end and return the handset to

the base.

 

 

TO CHOOSE THE LANGUAGE

1

Press call id/menu.

2

Press

or

to move the pointer to

 

Language.

 

3

Press select to select Eng (English) or

Fr. (French).

 

4

Press end or return the handset to

the base.

 

 

Step 4 Setting Up the Answering System

TURN THE ANSWERING SYSTEM ON

Press ans on/off.

 

 

status

 

delete

 

play/

 

 

 

stop

A pre-recorded greeting

 

 

 

will play and your

repeat/rew

 

skip/ff

set/ringer

menu

greeting memo

system is ready to

ans on/off

find hs

volume

accept calls.

 

 

 

TO RECORD A PERSONAL GREETING

 

Press and hold

 

status

 

greeting until

delete

 

play/

 

 

 

stop

1

you hear “Record

repeat/rew

 

skip/ff

greeting” and a

set/ringer

menu

greeting memo

 

confirmation

ans on/off

find hs

volume

tone.

Record your personal greeting. (Position

2 yourself as near to the base as possible and speak clearly.)

3

When finished press greeting again or

 

play/stop.

[ 4 ] Q U I C K R E F E R E N C E G U I D E

Image 6
Contents Page Page Contents Color of your cordless phone may vary Page Charging the Battery Controls and Functions N T R O L S a N D F U N C T I O N SO N T R O L S a N D F U N C T I O N S 38 to Read this First10 to About the digital security codeChecking the Package Contents Setting up the Phone Do the following stepsChoose the best location E T T I N G S TA R T E D Battery use time per charge Low battery alertCleaning the battery charging contacts Connect the base unit Mounting the Base Unit on a Wall Standard wall plate mountingTerminology Direct wall mountingSetting Menu Options Caller ID optionsPage Choosing the dial mode Setting the languageMaking and Receiving Calls Handset On Base Handset Off BaseHandset ringer tone and volume Earpiece volumeRinger Mute Tone Dialing Switch-over RedialTraveling Out-of-Range Selecting a Different Channel Flash and Call WaitingStoring Phone Numbers and Names Memory Dialing Steps for Entering Names and Special Characters If you make a mistake while entering a nameNumber of times key is pressed Integrated Answering Device Memory Dialing Memory dialing from Standby Mode Making Calls with Memory DialingDisplay a programmed number Memory dialing from Talk Mode Chain DialingEditing a Stored Name and/or Phone Number Memory 1 Stored Memory Store Erasing a Stored Name and Phone Number 7Press select or delete/chRocketDial Storing and Editing the RocketDialMaking calls with the RocketDial Deleting the RocketDial 5Press select or delete/chWhen the Telephone Rings You must subscribe to Caller ID service to use this featureCaller ID Viewing the Caller ID Message List 1Press call id/menuDeleting Information from the Caller ID List When the pointer is at YesWhen the pointer is at No Deleting a Caller ID messageCalling a party from the Caller ID list Using the Caller ID ListLong Distance calls and Area Code Setting/Cancellation Dial editStoring Caller ID messages in Memory dialing Features Integrated Answering DeviceSetting up Your Answering System Using the Menu ModeTurning the Answering System On/Off Setting the Time Setting a Personal Security Code PIN Setting the ring time Announce only feature Selecting the message record timeSetting the Message Alert tone Setting Your Outgoing Message Greeting Preset messageChoosing between the two outgoing messages Setting the base ringer volume Adjusting the speaker volume levelUsing Your Answering System Playing your messagesRepeating a message Skipping a messageDeleting a message Voice memo Recording a conversationRemote access away from home CommandTurn on the answering system remotely Changing the Digital Security Code Installing the BeltclipHeadset Installation To attach the beltclip To remove the beltclipMaintenance Troubleshooting Symptom SuggestionD D I T I O N a L I N F O R M a T I O N Symptom Suggestion Battery Information General InformationAC Adapter Information Precautions Installation Considerations Terminal Equipment Radio Equipment Index G, H, I, J, K, LRemote Operation Card Call your phone number from a touch-tone phoneTask Key At Uniden, we’ll take care of you Please do not Return this Product to the Place of Purchase