Installing Your Phone
Charge the Battery
) Unpack all handsets, battery packs, and battery covers. If any battery cover is already on 
the handset, press in on the notch and slide 
the cover down and off.
Black
Red
2)Line up the red and black wires on the battery pack with the label inside the handset.
) Push the battery pack connector in until it clicks into place. Tug gently on the wires to make sure the battery pack is securely connected.
) Place the cover over the battery compartment and slide it up into place.
) Connect the base AC adapter
to the
AC IN 7.8V
jack on the back of the
base. Route
the cord through the
molded wiring channel as shown.
) If you have accessory handsets, connect a charger AC adapter to each charger's AC IN 8V jack and set the plug into the notch as shown. (These adapters might already be connected.)
) Plug the other end of each adapter into a standard 120V AC power outlet.