
Finding a Lost Handset
To locate a misplaced handset, press [int’com] on the base when the phone is in standby. Use [] or [
] to select the handset you want to page, and then press [menu/select]. Select ALL to page all registered handsets. To cancel paging, press [int’com] on the base again.
Finding a Lost Handset Using Hold, Conference and Transfer
Using Hold, Conference and Transfer
Placing a Call on Hold
1)During a call, press [clear/int’com] on the handset or [int’com] on the base to place the caller on hold. If you leave a caller on hold for more than ten seconds, the display screen will read, Line On Hold.
2)To return to the party on hold, press [ /flash] or [] on the handset or [
] on the base. The phone will return to the holding party.
Notes: • You can only place a caller on hold for five minutes. Once five minutes has passed, that party’s line will be disconnected and the phone will return to standby.
• While a call is on hold, Caller ID and Call Waiting cannot be received.
Conferencing |
| Outside call |
If you have more than one handset, up to four people can |
| |
|
| |
participate in a conference call. A |
|
|
consists of an outside line, two handsets, and the base |
|
|
speakerphone. You can easily join a call already in progress. |
|
|
1) Press [ /flash] or [ ] on the handset or [ ] on the base | Handset #2 |
|
to join the call. |
|
|
2) To hang up, return the handset to the cradle or press [ ] on |
|
|
the handset or [ ] on the base. The other party will still be |
|
|
connected to the call. |
|
|
| Handset #1 | Base speakerphone |
37
DSS8955 OM.indb 37
28/7/08 5:20:59 PM