Troubleshooting

Blank or faint screen

Check the line cord.

Connect telephone cord.

Replace batteries.

Caller ID will not work properly

Call your telephone company to verify that your caller ID service is active.

Phone will not ring

You may have too many communication devices connected to a single line. A communication device can be a phone, a modem or fax machine. Disconnect some devices.

No dial tone

Verify that you are using the correct line cord and that it is plugged in correctly.

No data sent

If you have an answering machine or fax connected to this phone, ensure it is set to answer after at least two rings.

You have answered the call before two rings.

Contact your telephone company if the problem continues for more than 24 hours. The telephone company may be experiencing a temporary line fault.

No response on LCD display

If you have experienced a power failure when using the optional AC adaptor, the batteries for memory backup may have become weak or dead. If the power is restored and the display screen does not respond then you need to replace the batteries.

Please refer to our website for further information and frequently asked questions.

New Zealand - www.uniden.co.nz

Australia - www.uniden.com.au