Resetting the Terminal

Step 2: Charge the Batteries

There are two types of battery power: the main battery pack and the backup battery located inside the terminal. The main battery pack powers the terminal and charges the internal backup battery.

Dolphin terminals ship with both batteries discharged of power. Charge the main battery pack for a minimum of four hours before initial use!

You can use one of the following charging peripherals:

• Dolphin HomeBase (shown right)

•Dolphin ChargeBase

•Dolphin QuadCharger

• Dolphin Charge/Comm Cable

• Dolphin AC Adapter Cable

Use a Dolphin 7850 peripheral and the power cables

! provided by Hand Held Products. Use of peripherals or Dolphin HomeBase cables not sold/manufactured by Hand Held Products

will void the warranty and may damage the terminal.

Step 3: Boot the Terminal

The terminal begins booting as soon as power is applied and runs by itself. Do NOT press any keys or interrupt the boot process.

When the boot process is complete, the Today screen appears and the terminal is ready for use.

There are two ways to reset the terminal: a soft reset and a hard reset.

Soft Reset: Press and hold the Red + ESC keys for approximately five seconds.

A soft reset restarts the terminal without erasing RAM data.

Hard Reset: Press and hold the Red + TAB keys approximately five seconds.

A hard reset re-initializes the terminal.

User Documentation

For more information about using the Dolphin terminal, refer to the Dolphin 7850 Series User’s Guide, which can be downloaded from www.handheld.com.