錯誤! 尚未定義樣式。
Switching on with application buttons
By default, you can also switch your Pocket LOOX on by briefly pressing one of the application buttons. The applications assigned to the respective button appears on the screen. The applications Easy2Connect, Today, Contacts and Calendar are preset. However, you can change the applications to be called up at any time according to your needs (see the "Configuring the Pocket PC” chapter) so that your preferred program opens immediately at the press of a button.
By making the appropriate setting in FSC KeyLock (see chapter "Configuring the Pocket
i PC"), you can also prevent the Pocket PC from being switched on when an application button is pressed.
Switching on and off with soft reset (warm boot)
After certain applications or the installation of new programs, it may be necessary to restart the Pocket PC with the soft reset.
! | Data not yet saved in a file will be lost during this procedure. On the other hand, data in | |
the RAM memory are retained. | ||
|
► End all applications before you carry out a soft reset.
1 |
2 |
►Take the stylus and screw it apart (1).
►Briefly press the tip (2) into the soft reset opening.
The warm boot is carried out. The application you have just been working in appears on the display of your Pocket PC.
20 |