Power Cords
47
Pocket PC H3700 Series or for an AC power accessory intended for use with your device, you should purchase a power cord that is approved for use in your country.
The power cord must be rated for the product and for the voltage and current marked on the product’s electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the diameter of the wire must be a minimum of
0.75mm 2 /18AWG, and the length of the cord must be between 5 feet (1.5 m) and 6.5 feet (2 m). If you have questions about the type of power cord to use, contact your Compaq authorized service pro- vider.
A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electri- cal outlet, and the point where the cord exits from the product.
WARNING: To reduce the risk of personal injury, electric shock, fire, or damage to the equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety fea- ture.
Plug the equipment into a grounded (earthed) electrical outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the power cord from the electrical
outlet.
Do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them.
Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp the cord by the plug.
WARNING: To reduce the risk of electrical shock, fire, or dam- age to the equipment:
Do not use converter kits sold for appliances to power the computer.