GE 2-9079, 347A8359-0001 manual Powering the Caller ID Unit, Installing the Batteries

POWERING THE CALLER ID UNIT

The unit can operate on batteries only, but you must use the AC power supply in order for the new call indicator light and the display backlighting to work.

INSTALLING THE BATTERIES

Install 4 AAA-size batteries to retain caller ID informa- tion in the event of a power failure.

Disconnect the line cords from the back of the unit and wait a few seconds for the unit to go into standby.

1.Open the battery compartment door by pressing on the door and sliding it in the direction of the arrow.

2.Insert 4 AAA-size batteries as shown on the diagram in the battery compartment.

3.Replace the battery compartment door securely.

1

2

2