Radio Shack CID 940 owner manual Connecting the System, Connecting to a Single-Line Phone

Page 11

43-940.fm Page 11 Tuesday, April 25, 2000 1:04 PM

CONNECTING THE SYSTEM

The system’s transmitter connects to any modular phone jack and your phone. You can also connect it to an answering ma- chine.

Note: To insure proper operation, always connect the system’s transmitter directly to a wall jack.

Connecting to a Single-Line Phone

1.Disconnect the line cord from your phone and plug it into the transmitter’s LINE-INjack. Be sure the other end of the line cord is directly connected to a wall jack.

2.Plug one end of the supplied line cord into the transmitter’s

LINE-OUT jack.

LINE-IN LINE-OUT

3. Plug the other end of the cord into the phone’s jack.

Connecting to an Answering Machine

1.Plug a telephone line cord from the phone line into the transmitter’s LINE-INjack. Be sure the other end of the line cord is directly connected to a wall jack.

2.Plug one end of the supplied line cord into the transmitter’s LINE-OUTjack and plug the cord’s other end into the answering machine’s line jack.

Preparation

11

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 10 Page 12
Image 11
Page 10 Page 12
Contents CID 940 Wireless Caller ID System Contents Risk of Electric SHOCK. do not Open Features Important Information FCC Information Fm Page 7 Tuesday, April 25, 2000 104 PM Preparation Powering the SYSTEM’S TransmitterInstalling Batteries Powering the SYSTEM’S ReceiverUsing AC Power Connecting to an Answering Machine Connecting the SystemConnecting to a Single-Line Phone Checking the Range Setting the SYSTEM’S Identification CodeSettings appears Reviewing Call Records OperationReceiving and Storing Calls Message Waiting Displayed Call InformationDeleting All Calls Deleting CallsDeleting a Single Call Problem Solution TroubleshootingFCC Wants YOU to Know Care and MaintenanceLightning Limited One-Year Warranty
Top Page Image Contents