TIP
If using the AC Adaptor, Batteries are not required for normal operation.
Always ensure telephone cord is disconnected before opening the battery compartment door and installing batteries.
Connecting Handset Cord and Desktop Bracket
1.Plug the handset cord into the handset jack located at the rear of the phone.
2.Route the handset cord through the handset cord channel.
3.Locate the Desktop Bracket over the positioning posts at the rear of the phone and slot in place. The handset cord channel will be secured by the Desktop Bracket.
Connecting Line Cords and AC Adaptor
1.Plug one end of the supplied telephone cord into the telephone line jack located at the rear of the phone.
2.Plug the other end into the telephone line wall jack.
3.Plug the AC Adaptor lead into the power line jack at the rear of the phone.
4.Plug AC Adaptor into a standard wall outlet and switch it on.
Optional Backup Battery Installation
Batteries may be used instead of the supplied AC Adaptor.
1.Remove the battery compartment cover.
2.Fit 4 x AAA alkaline batteries.
3.Replace the cover.
Based on ½ hour use per day, good alkaline batteries should last
| Battery | _ | SIZE "AAA" 1.5V | + |
4x AAA Batteries | + | SIZE "AAA" 1.5V | _ | |
| compartment | _ | SIZE "AAA" 1.5V | + |
|
| + | SIZE "AAA" 1.5V | _ |
|
|
|
TELE
3
FP205 OM Page3 | 24/9/07 2:38:13 PM |