TGA930BX(e).fm Page 4 Thursday, March 13, 2008 6:25 PM
Registering a handset to a base unit
1Base unit: KX-TG9311/KX-TG9361
Press and hold {LOCATOR} for 4 seconds. (No registration tone)
KX-TG9331/KX-TG9341
Press and hold {LOCATOR} for 4 seconds until the registration tone sounds.
LIf all registered handsets start ringing, press the same button to stop. Then repeat this step.
LThe next step should be completed within 90 seconds.
2Handset:
Press {OK}, then wait until a long beep sounds.
Note:
LWhile registering, “Base registering” is displayed on all registered handsets.
LIf “Error!!” is displayed while registering, press {OFF} and register the handset again.
Wall mounting
1Drive the screws (not included) into the wall.
2Mount the charger (A), then slide it down (B) and to the right (C) until it is secure.
25.4 mm | A |
B 
C
Screws
(220-240
– 4 –