Panasonic KX-TCD430E Battery replacement, Turning the power on/off, Setting the time and date

Page 8

Preparation

Battery replacement

If 074 flashes even when the handset batteries have been fully charged, both batteries must be replaced.

Important:

LPlease use only the Panasonic batteries, noted on page 3.

LUse only rechargeable batteries. If you install non-rechargeable batteries and start charging, the batteries may leak electrolyte.

LDo not mix old and new batteries.

LUse only 2 nickel metal hydride (Ni-MH) batteries or 2 nickel cadmium (Ni-Cd) batteries. Do not mix battery types.

LEnsure that the correct battery type is selected (page 19).

1Press the notch on the cover firmly and slide it in the direction of the arrow.

2Remove the batteries positive (+) terminal first. Replace both batteries. See the battery installation on page 6.

Turning the power on/off

Power on

Press {ih} for about 1 second.

LThe display will change to the standby mode.

Power off

Press {ih} for about 2 seconds. LThe display will go blank.

Setting the time and date

Important:

LConfirm that the AC adaptor is connected. LEnsure that w is not flashing.

1Press {j}.

2Press {v} repeatedly to display “SETTING BS”, then press {>}.

3Press {*}.

4Enter the current hour and minute by selecting 2 digits for each (24-hour time entry).

Example: 15:15 Press {1}{5} {1}{5}.

LIf you make a mistake, press {C}. Digits will be cleared from the right.

5Press {>}.

L“SETTING BS” will be displayed.

6Press {>}, then press {*} 2 times.

7Enter the current day, month and year by selecting 2 digits for each.

Example: 17 May, 2004 Press {1}{7} {0}{5} {0}{4}.

LIf you make a mistake, press {C}. Digits will be cleared from the right.

8Press {>}.

L“SETTING BS” will be displayed.

9Press {ih}.

Note:

LIf a power failure occurs, set the time and date again.

8	Helpline Tel. No. :U.K. 08700 100 076 R.O.I. 01289 8333

Image 8

Contents Operating Instructions Index Accessory information Included accessoriesAdditional/replacement accessories Model No Description Sales and Support InformationImportant information Location of controls HandsetBase unit Receiver Display Phonebook D C Talk NavigatorBattery installation ConnectionsBattery charge Setting the time and date Battery replacementTurning the power on/off Making calls Redial featureOther features Answering calls Handset locatorPhonebook Storing phone numbers and namesEditing a stored entry Erasing a stored entryMaking calls using the phonebook Making calls using a hot keyHot key quick dial Assigning an entry in the phonebook to a hot keyEditing a caller’s phone number before calling back Caller ID serviceViewing caller information and calling back Erasing caller information Storing caller information into the phonebookGuide to handset settings 2nd menu 3rd menu Default settingRinger options Handset settingsTime alarm Selecting the standby mode display Example Selecting the talk mode displayTone options Display optionsSetting call bar Call optionsSelecting the display language Storing the direct call numberOther options Guide to base unit settings Base unit settingsAdjusting ringer volume Setting time break/earth recallTurning on/off call restriction Setting pause lengthSetting call restriction Resetting the base unit to its default settings Cancelling a restricted numberStoring emergency numbers Changing stored emergency numbersOperating additional units Registering a handset to a base unitAdditional handsets Additional base unitsSelecting a base unit Cancelling a handsetCancelling a base unit Setting all handsets to ring Setting the selected handsets to ringHandset To transfer a call directly without speaking to handsetTroubleshooting Caller information is not displayed Handset beeps intermittently and/or 074 flashesFully charged the batteries, but 074 still flashes Technical information Wall mountingConditions of guarantee Index Dear Purchaser For your future referenceDeclaration of conformity Customer Care Helpline Tel. No. U.K 100 076 / R.O.I