Panasonic KX-TD7694 Operating Range, Noise, Model No Main Processing MPR Software Version

Page 66

Important Information

For Best Performance

Operating Range

1.The range of operation depends on the topography of your office, weather, or usage conditions, because signals are transmitted between the CS and the handset by radio waves.

2.Normally, you get greater range outdoors than indoors. If there are obstacles such as walls, noise may interfere with your telephone calls. In particular, high metal shelves or reinforced concrete walls will restrict your operating range.

3.A handset may not work when it is too far from the CS depending on the structure of the building.

Noise

Occasional noise or interference may occur due to electromagnetic radiation from objects such as refrigerators, microwave ovens, faxes, TVs, radios, or personal computers. If noise disturbs your telephone calls, keep the handset away from these electrical appliances.

We strongly suggest you hold the bottom half of the handset to ensure better call quality. Because, the antenna is located in the upper half of the handset.

System Requirements

 

PBX

CS

Model No.

Main Processing (MPR) Software Version

 

KX-TDA50

PSMPR Software File Version 3.0005 or later

KX-T0151

KX-TAW848

 

KX-TDA0152

 

 

KX-T0141

KX-TDA100

PMPR Software File Version 3.0002 or later

KX-TDA0142

KX-TDA200

 

 

KX-TDA600

PLMPR Software File Version 3.1006 or later

 

 

 

 

KX-TDE100

PMMPR Software File Version 1.0000 or later

 

KX-TDE200

 

 

66

Document Version 2007-06

Page 65 Page 67
Image 66
Page 65 Page 67
Contents Operating Instructions GHz Portable StationTable of Contents Document Version Accessories included Before Initial UseCharging the Battery InstallationBattery Installation Charger ConnectionCharger Wall Mounting Attaching the Belt ClipTo attach Power On Standby mode Power Off Location of ControlsBack View Key Lock Meeting Mode Selecting the Display Language Editing the Standby Display NameStick Editing the Names of the Flexible CO Keys You can edit a name for each flexible CO key of the handsetAdjusting the Ringer Volume To adjust the ringer volumeChanging the Vibrate Setting Adjusting the Receiver/Speaker/Headset VolumeBattery Indicator *1 DisplaySoft Keys Displayed when it is possible to use Operation Outline PBX Extension PhonebookFunction Menus Function Keys Flexible CO Keys Understanding the F-CO Key Icons*1Making Calls Desired No To dial Hot Line To store Desired Phone No To set/cancelOne-touch Dialing To store To dial Operator CallTo answer from an idle extension Searching for an item stored in the Phonebook Handset PhonebookPBX System Phonebook Stick UP or DownPBX Extension Phonebook Receiving Calls Call Pickup Directed Extension No Group Group No digitsCaller ID During a Conversation To leave a conferenceUseful Features Paging Paging Group No digits Announce Call Waiting To set/cancel for intercom callsTo set/cancel for outside calls To answerAt Ext %%%% + Extension no To cancel a message waiting indication Desired Extension NoAbsent Message To set For Log-out AllOperation Making Use of the Voice Mail Service Private Ring Handset PhonebookStoring an Item in the Handset Phonebook Storing a New ItemStick Joystick UP Editing a Stored ItemSoft Key Stick Edit phone numberStoring an Item Using the Predialing Storing an Item Using the Outgoing Call LogMove the Joystick UP or Down Storing an Item Using the Incoming Call LogPress the Right Category number 1-9 or Off.*1Soft Key Joystick Storing an Item Using the PBX System PhonebookStoring an Item Using the PBX Extension Phonebook Category number 1-9 or Off.*2Editing Category Names Soft Key Stick Stick UP or Assigning Hot KeysEnter name. *1 Press the Left Press the Joy Key number StickEntering Characters Character Mode Table Keys ABC AlphabetUnlocking the Handset Phonebook Locking the Handset PhonebookLocking the Handset Phonebook Unlocking the Handset Phonebook TemporarilyHandset Phonebook Hot Key DialOutgoing Call Log Incoming Call LogChanging the Initial Settings Handset Setting Menu Layout Main ItemSub Item Sub Item Description Setting Default Incoming OptionTalk Option Answer Option Key OptionDisplay Option Tone Option System OptionOther Option Select the Alarm mode-Off Memo Alarm SettingSelect the Alarm mode-Weekly *2 To setTo delete the alarm mode setting To stop the alarmTroubleshooting Once more Clean the battery charge contactsCharging the battery Handset feels Warm While operating These are normal conditionsError Messages Battery Information Operation Operating TimeImportant Safety Instructions Important Information FCC Information Radio Frequency Exposure RequirementsCustomer Information Hearing Aid CompatibilityOther Important Information For Product ServiceProduct Service To return a product for repairOperating Range NoiseModel No Main Processing MPR Software Version Document Version Panasonic Puerto Rico, Inc Copyright
Top Page Image Contents