Panasonic battery performance
Operation | Operating time |
While in use | Up to 17 hours |
(talking) |
|
|
|
While not in use | Up to 7.5 days |
(standby) |
|
|
|
Note:
LThe handset can be left on the charger without any ill effect on the batteries.
LThe battery level may not be displayed correctly or the entire display may go blank after you replace the batteries. In this case, place the handset on the charger and let charge for 7 hours.
Registration
Register the handset to a
1Base unit:
Press and hold {LOCATOR} until the registration tone sounds.
LIf all registered handsets start ringing, press {LOCATOR} to stop, then repeat this step.
LAfter the base unit beeps, the rest of the procedure must be completed within 1 minute and 30 seconds.
2Handset:
Press {OK}, then wait until a beep sounds and w stops flashing.
Changing the display language
1{MENU}
2{V}/{^}: “Handset settings” i
{OK}
3{V}/{^}: “Display settings” i
{OK}
4{V}/{^}: “Change language” i
{OK}
5{V}/{^}: Select the desired setting.
6{OK} i{OFF}
Belt clip
You can hang the handset on your belt or pocket using the included belt clip.
To attach the belt clip
To remove the belt clip
While pressing the top of the clip(A), pull the right edge in the direction of the arrow (B).
A
B
4For assistance, please visit http://www.panasonic.com/help