Panasonic KX-TG1811AL Registering a handset, Changing the PIN, Handset PIN, Base unit PIN

TG1811_1812_1813AL(e-e).book Page 21 Friday, May 12, 2006 2:25 PM

	Useful Information
Problem	Cause & solution
Pressing {R} does not	L The redialled number was more than 24 digits long. Redial
display/dial the last	the number manually.
number dialled.
I fully charged the	L Clean the charge contacts and charge again (page 9).
batteries, but 074	L It is time to replace the batteries (page 9).
still flashes.
I fully charged the	L Wipe the battery ends (S, T) and the unit contacts with a
batteries, but the	dry cloth. Charge the batteries for 7 hours before reuse.
operating time seems to
be short.
Caller information is not	L You must subscribe to Caller ID service.
displayed.	L Your unit is connected to a telephone line with ADSL
	service. We recommend connecting a filter (contact your
	ADSL service provider) to the telephone line between the
	base unit and the telephone line socket.
	L Caller has withheld information.
I cannot remember the	L Change the PIN (page 21).
PIN.

Registering a handset

1{j/OK} i“SETTING HS” i{>}

2“REGISTRATION” i{>}

3“REGISTER HS” i{>}

4Press and hold {x} on the base unit for about 5 seconds.

LIf all registered handsets start ringing, press {x} to stop, then start again from step 1.

LThe rest of the procedure must be completed within 1 minute.

5Press {e} or {v} to select a base unit number. i{>}

6Wait until “BS PIN” is displayed. i Enter base unit PIN (default: “0000”). i{>}

LIf you forget your PIN, see page 21.

LA confirmation tone will sound, and w will stop flashing.

LIf w is still flashing, start again from step 1.

Changing the PIN

Handset PIN:

1{j/OK} i“SETTING HS” i{>}

2“OTHER OPT” i{>}

3“HSPIN CHANGE” i{>} i

{*}{7}{0}{0}{0}

4Enter the new 4-digit handset PIN.

5Enter the new 4-digit handset PIN again. i{ih}

Base unit PIN:

1{j/OK} i“SETTING BS” i{>}

2{5} i{*}{7}{0}{0}{0}

3Enter the new 4-digit base unit PIN.

4Enter the new 4-digit base unit PIN again. i{ih}

21