Lens, Fasteners, Reflector | Cooper Lighting EC, EW instruction

DESCRIPTION

The Fail-Safe VR 2000 9" Square Series combines strength-gaining architecture with energy-saving technology. Architecturally angled facets with radius corners actually increase the ability of the lens to deflect blows and absorb impact. Extra thick injection molded polycarbonate lens incorporates optical design that obscures the lamp image and spreads light evenly. U.L. listed and C.S.A. certified for wet locations. Mount on non-combustible surface.

The durable, versatile 9" Square EC/EW is perfect for use in corridors, dormitories, public rest rooms, rapid transit stations, loading docks and minimum security institutions.

SPECIFICATION FEATURES

Catalog #

Project

Comments

Prepared by

FAIL-SAFE®

Type

Date

A ... Lens

One piece injection molded UV stabilized polycarbonate, min. 0.130" thick. All light control prisms

&blondels are on the inside surface of the lens, reducing dirt build-up and making cleaning easier.

B ... Fasteners

Four stainless steel TORX® screws with center reject pin. Screw heads are recessed into lens to maximize tamper-resistance. Fasteners are captive in the lens and sealed by means of a neoprene O-ring.

C ... Reflector

16 ga. CRS with white high reflectance polyester powder coat finish.

D ... Housing

Die-cast aluminum with reinforcing ribs on exposed sidewalls. Thickened areas occur at lens junction and at mounting/fastening holes. Four 1/4" dia. fasteners are required for maximum vandal resistance. Four 1/2" NPT entries for surface conduit.

E ... Socket

Porcelain medium base socket with nickel-plated brass screw shell. Shock absorbing socket bracket protects lamp from impact.

F ... Gasket

One piece die-cut closed cell silicone mounting gasket seals entire lens and housing.

G ... Ballast

Copper-wound NPF or HPF ballast available. Consult ordering information.

D B E A

SIDE DIMENSIONS

D e e p

9" Sq.

[229mm]

EW 9" SQUARE

35W - 100W

High Pressure Sodium Metal Halide

POLYCARBONATE 9" SQUARE LUMINAIRE Clear Prismatic or White Vandal Resistant Luminaire

4 11/16"

[119mm]

3 1/8"

[80mm]

Specifications and Dimensions subject to change without notice.

Consult your representative for additional options and finishes.

E N E R G Y D ATA

For Energy Management related technical data to support the performance of this fixture series, refer to the ordering information for input wattage.

ADC041364 04/17/2007 10:11:12 AM