Panasonic KX-TG2622AL, KX-TG2621AL operating instructions 052, 100ms 8 90ms

TG2621AL_2622AL.book Page 30 Monday, February 20, 2006 3:40 PM

Programming

Feature	Feature	Setting code	System
	code		setting
Set recall time*6	{0}{5}{2}	{1}: 700ms {2}: 600ms	r
		{3}: 400ms {4}: 300ms
		{5}: 250ms {6}: 110ms
		{7}: <100ms> {8}: 90ms
Voice enhancer	{5}	{1}: On {0}: <Off>	–

*1 If you subscribe to Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.

*2 KX-TG2622

*3 This tone lets you know when you receive a call while you are on an intercom call. If you select “On”, the tone sounds repeatedly for as long as the line rings. If you select “2”, the tone only sounds 2 times (KX-TG2622).

*4 You can select whether or not key tones are heard when keys are pressed. Includes confirmation tones and error tones.

*5 Generally, the line mode setting should not be adjusted. If “Line in use” is not displayed when another phone connected to the same line is in use, you need to change the line mode to “A”.

*6 The recall time depends on your telephone exchange or host PBX. Consult your PBX supplier if necessary.

You can access your service provider/telephone company “Call Waiting” service by having the recall time set at 100 ms, and then follow your service provider/telephone company “Call Waiting” instructions to operate this service.

30