Useful Information
Troubleshooting
Problem | Cause/solution |
The speaker/receiver does | LThe application software you want to use with |
not sound. | the unit was started before installing the unit. |
| Please restart the application software. |
| LThe USB cable is not connected properly to the |
| unit and your computer. Connect it. |
| LMake sure that your computer audio device’s |
| playback volume is set to the maximum and that |
| mute mode is not selected. |
| LThe unit may not be selected as the audio |
| device of your computer. Please confirm the |
| setting of your computer as follows. |
| Example: Windows XP |
| 1 Click “start”, then click “Control Panel”. |
| 2 Click “Sounds, Speech, and Audio Devices”. |
| iClick “Sounds and Audio Devices”. i |
| Click “Audio” tab. |
| 3 Make sure that the default device of “Sound |
| playback” is “Panasonic |
| LThe unit may not work properly depending on |
| the power supply of your computer’s USB port. If |
| this is the case and your computer has multiple |
| USB ports, we recommend that you try other |
| USB ports. |
|
|
8