Panasonic KX-TG2503NZF, KX-TG2503ALF operating instructions Handset Locator

4 One-Touch Dialler Section 4

4-A Storing a Phone Number in the DIRECT Button

You can store a phone number in the (DIRECT) button. The stored number is dialled with a one-touch operation.

The TALK indicator light must be off before programming.

(DIRECT)

TALK Indicator

1

2

Press PROGRAM á.

•The TALK indicator flashes.

Enter a phone number up to 22 digits.

•If you misdial, press PROGRAM á, and start again from step 1.

(TALK)

PROGRAM AUTO

	3	Press (DIRECT).
		•A beep sounds.
,	•If a pause is required for dialling,
	press (PAUSE) where needed.
	Pressing (PAUSE) counts as one digit
	(5-C).

4-B Dialling a Stored Number in the DIRECT Button

Press (TALK) \ (DIRECT).

To erase a stored number: press PROGRAM á \ AUTO Ü \ (DIRECT).

Special Features

5-B Automatic Security Code Setting

Whenever you place the handset on the base unit, the unit automatically selects one of more than a million security codes. These codes help prevent the unauthorized use of your telephone line by another cordless telephone user.

5-C How to Use the PAUSE Button

(For Analog PBX Line/Long Distance Service Users)

We recommend you press (PAUSE) if a pause is required for dialling with a PBX or to access a long distance service.

Ex: Line access number (9) (PBX)

(9) \ (PAUSE) \

Phone number

•Pressing (PAUSE) once creates a 3.5 second pause. This prevents misdialling when you redial or dial a stored number.

•Pressing (PAUSE) more than once increases the length of the pause between numbers.

5-D Handset Locator

You can locate the handset or page the handset.

1	Press (HANDSETÒLOCATOR) on the base unit.
	•The IN USE/CHARGE indicator flashes and the handset beeps for 1
2	minute.
	To stop paging, press (HANDSETÒLOCATOR) again or press (TALK)
	twice on the handset.