Registering a handset to the base unit

For assistance, please visit http://www.panasonic.com/help

Attention:

A nickel metal hydride battery that is recyclable powers the product you have purchased.

Please call 1-800-8-BATTERY (1- 800-822-8837) for information on how to recycle this battery.

1Handset:

Lift the handset and press {OFF}.

Press and hold {LOCATOR} for about 5 seconds until the registration tone sounds.

LIf all registered handsets start ringing, press the same button to stop. Then repeat this step.

3Handset:

Place the handset on the charger.

LContinue the operation even when the handset display shows “Registering”.

4With the handset still on the charger, wait until a long beep sounds and w stops flashing.

Note:

LIf an error tone sounds, or if w is still flashing, register the handset according to the base unit’s operating instructions.

1{MENU} i{#}{1}{1}{0}

2{V}/{^}: Select the desired setting.

3Press the middle soft key to save. i{OFF}