Panasonic KXTS880B, KX-TS880B operating instructions Liquid damage

KX-TS880.book Page 34 Friday, October 15, 2010 5:04 PM

Useful Information

Problem	Cause/solution
The 2nd caller’s information is	≥ In order to use Caller ID, call waiting, or Call
not displayed during an outside	Waiting Caller ID (CWID), you must first contact
call.	your service provider/telephone company and
	subscribe to the desired service.
	After subscribing, you may need to contact your
	service provider/telephone company again to
	activate this specific service, even if you already
	subscribed to both Caller ID and Call Waiting with
	Caller ID services (CWID).
While programming or	≥ A call is being received. Answer the call and start
searching, the unit starts to ring	again after hanging up.
and stops the program/search.
The display exits the caller list.	≥ Do not pause for over 60 seconds while
	searching.
You cannot redial by pressing	≥ If the last number dialed was more than 32 digits
{REDIAL}.	long, the number will not be redialed correctly.
Information stored in the redial	≥ If “	” flashes, replace the batteries as soon as
list is erased.	possible.	Otherwise, information stored in the
	redial list will be erased. Store the desired item in
	the phonebook, one-touch dial or speed dial
	memory before the battery replacement.

Liquid damage

Problem	Cause/solution
Liquid or other form of	≥ Disconnect the telephone line cord from the unit.
moisture has entered the unit.	Remove the batteries from the unit and leave to
	dry for at least 3 days. After the unit is
	completely dry, reconnect the telephone line
	cord. Insert the batteries.

Caution:

≥To avoid permanent damage, do not use a microwave oven to speed up the drying process.

34For assistance, please visit http://www.panasonic.com/help