Operating the built-in answering device
Operating the answering device from a remote location
Preparation: Programming the remote operation ID
1.Press (Function/Edit).
2.Press (Select) repeatedly until the following is displayed.
ルス ハ ゙ ン テ ゙ ン ワ ノ ア セ ッ テ イ
カ イ セ シ シ シ シ [ ケ ッ テ イ ] オ ス
3.Press (Register/Set).
4.Enter any
or #.
5.Press (Register/Set).
6.Press (Stop).
Operation: Listening to a recorded message from a remote location
Turn the (Auto answer) light on before you go out. Remote operations are available only from a touch tone telephone.
1.Call your unit.
2.Enter the remote operation ID during the greeting message.
3. Press 2 or wait 4 seconds.
●Only the new recorded messages will be played back.
● To listen to all the recorded messages, press 4 after the new messages have been played back.
17