Panasonic KT-TG7861AL Storing an area code to be deleted automatically, Setting call restriction

Programming

the call is logged in the caller list (page 32) with after the call is disconnected.

Storing unwanted callers

You can store up to 30 phone numbers in the call barred list.

Important:

RYou must store the phone number with an area code in the call barred list.

nFrom the caller list:

1 MCN ()

2 MbN: Select the entry to be barred. a MN a MN

3 MbN: “Save CID” a MOKN

4 MbN: “Caller Barred” a MOKN

5 MbN: “Yes” a MOKN a MeN

nBy entering phone numbers:

1 MN (right soft key) #217 a

MN

2Enter the phone number (24 digits max.). a MOKN

R To erase a digit, press MCN.

3MeN

Viewing/editing/erasing bar call numbers

1MN (right soft key) #217

2MbN: Select the desired entry. R To exit, press MeN.

3To edit a number:

MN a Edit the phone number. a MOKN a MeN

To erase a number:

MN a MbN: “Yes” a MOKN a MeN

Note:

RWhen editing, press the desired dial key to add, MCN to erase.

Storing an area code to be deleted automatically

In some situations, phone numbers stored automatically in the caller list (page 32) will include area codes. If you do not want to dial the area code when making calls from the caller list, you can store the area code which you want the unit to delete automatically. Example: You have stored the area code “123”. If you make a call from the caller list to the phone number “123-456-7890”, the unit dials “456-7890”.

1MN (right soft key) #255

2Enter an area code (5 digits max.). a MOKN a MeN

Setting call restriction

You can restrict selected handsets from dialling certain numbers. You can assign up to 6 phone numbers to be restricted, and select which handsets are to be restricted. Storing area codes here prevents the restricted handsets from dialling any phone number in that area code.

1MN (right soft key) #256

2Enter the base unit PIN (default: “0000”). R If you forget your PIN, contact an

authorised service centre.

3Select the handsets to be restricted by pressing 1 to 6.

R All handsets registered to the base unit are displayed.

R “” is displayed next to the selected handset numbers.

R To cancel a selected handset, press the same dial key again. “” disappears.

4MOKN

5Select a memory location by pressing 1 to 6. a MOKN

6Enter the phone number or area code to be restricted (8 digits max.). a MOKN a MeN

R To erase a restricted number, press MCN.

28

TG786xAL(en)_0111_ver002.pdf 28

2013/01/11 11:36:21