Panasonic KX-NT136 manual Tilt Angle Adjustment, Wall Mounting

Page 11

Tilt Angle Adjustment

4

3

2

1

The tilt angle of the operation board can be adjusted to one of four angles.

To lift: Lift up the operation board to the desired step-angle (12 3 4).

To set down: Lift up the operation board to the highest angle and then press down to step-angle 1. Be careful not to get your

fingers caught between the base and the operation board.

Pull down the handset hook until it locks to prevent the handset from slipping down from the operation board when at step-angle 4.

Wall Mounting

1 Set the operation board to step-angle 1.

3 Mount the unit on the wall.

83 mm

(3-1/4 in)

2 Connect the Ethernet cable, and then attach first and then of the wall mounting adaptor (included).

4 Pull down the handset hook until it locks, so the tab holds the handset.

To temporarily place the handset down during a conversation, hook it over the

top edge of the telephone as shown.

11

Image 11
Contents Important Information Quick Reference GuideImportant Notice Features List Conversation Off-hook MonitorCall Park Multiple PartyName Using the Display Proprietary TelephoneUsing the Call Log or Directories Accessing the System Features SettingEntering Characters Standard modeOption mode Input Settings on the Programming ModeSetting Features Selection & ParameterNo-Off Absent Msg Off Flexible CO Buttons Location of ControlsLCD Liquid Crystal Display Soft Buttons S1-S4 Fingers caught between the base and the operation board Tilt Angle AdjustmentWall Mounting Panasonic Puerto Rico, lnc Connection