Condition Action LCD Display | Panasonic 900 MHz instruction

Understanding Your Telephone

When the 900 MHz handset goes idle, the handset LCD is cleared. When the base station updates the second line of the LCD, the first line is also cleared.

HANDSET CONTROLS

Note: Operate this handset only when it is not in the charging unit.

Condition	Action	LCD Display

	Press vol on the
Handset	front of the
Handset	handset to select	Non display
Active (talk	handset to select	Non display
Active (talk	a high or low	indications
mode)	a high or low	indications
mode)	earpiece volume
	earpiece volume
	level.

Handset	Press vol on the
Handset	front of the
Inactive	front of the
Inactive	handset to select
(standby	handset to select
(standby	one of the
mode)	one of the
mode)	following settings:
	following settings:

	Ring type A (High)
	Ring type A (Low)
	Ring type A (Low)