AUVI Technologies WIP20S manual Hardware Connection, Connecting the WIP20

Page 11

Hardware Connection

Section 4

This section explains how to physically connect the WIP20 to your computer.

Connecting the WIP20

1.Connect the line-in cables to your sound card on the back of your computer. Pink = MIC jack

Green = SPKR jack

2.Connect the line-in cables to the WIP20. Pink = Mic in

Green = Audio in

3.Connect the AC adapter to the “Power in” jack on the back of the WIP20.

NOTE: Do not plug use a power cord other than the one supplied with the WIP20. Doing so could cause severe damage to the unit and will void its warranty.

4.Connect a traditional or cordless phone to the RJ-11 jack on the front of the WIP20.

NOTE: Do not plug the WIP20 directly into a wall jack. Doing so could cause severe damage to the unit and will void the warranty.

Image 11

Contents WIP20S Table of Contents Modifications Regulatory Compliance NoticeTechnical Support TrademarksSystem Requirements DiagramPackage Contents IntroductionSkype Software Installing Skype SoftwareCreating a Skype Account Adding a Skype contact Section SkypeOut SkypeInHardware Connection Connecting the WIP20Section Installing the Auvi Interface Auvi Software InstallationIf you want a desktop icon, check the box and click Next Section Contacts OperationsBasic Operations Guide Skype is running but I do not hear a dial-tone TroubleshootingLimited Warranty