names, use ▲ or ▼ to highlight Default All located between Channel 88A and Exit. Use ▲ or ▼ to highlight Yes then press ENTER to restore all the original names. A double beep sounds to confirm the action.
.To restore only one name to default, highlight the channel by using ▲ or ▼then press ENTER. Then use ▲ or ▼ to next highlight Default.
Setting CTCSS Codes
[FRS Band Only]
If you encounter interference |
|
|
|
| FRS | MENU | |
from another FRS radio while |
| ||
| CODE |
| |
using the FRS band, enabling |
|
| |
one of the 142 CTCSS codes |
| Lamp | Adjust |
may prevent that interference. |
| ||
|
|
| |
| Contrast | ||
1. With the FRS band |
| ||
|
|
| |
operational, momentarily |
|
|
|
press MENU. |
|
| |
.Use ▲ or ▼ to scroll to CODE.
3.Press ENTER. The currently used FRS channel is highlight- ed. To select a different channel, press either ▲ or ▼
FRS CODE
Channel 09
Channel 10
Channel 11
CHANNEL 10-OFF
On
Off
Exit
4.Press ENTER to choose it. You can select ON, OFF, or EXIT, next.
5.Use ▲ or ▼ to choose ON (to associate a CTCSS
Uniden MHS550 Radio Owner’s Manual | 41 |