Uniden UH400SX-RM, UH500SX-RM owner manual MIC Hanger mounted over MIC Cable

UNIDEN Model UH400SX, UH400SX-RM, UH500SX, UH500SX-RM OM

Mounting the MIC Hanger

MIC Hanger mounted over MIC Cable

The curly cord of the Standard MIC and Remote SPK/MIC can extend up to 1.5m.

For practical mounting of the MIC Hanger using the threaded cord technique it is highly recommended to use this technique with the optional Extension Cable.

Using the second part of the MIC Hanger as a template mark and drill a single 13mm hole. The hole needs to be large enough (13mm min) to allow for the MIC plug of the microphone to fit through.

Feed RJ45 MIC plug through the hole and connect to the optional Extension Cable. Connect the other end of the Extension Cable to a MIC Jack on the radio.

Mount the MIC Hanger using the Screw (single part) or Double Sided Tape (two part) option described on the previous page, making sure the MIC Hanger is centred over the hole where the MIC cable is fed through. The single or two part MIC assembly has a routing cavity to allow fitting over the MIC cable.

16