Uniden UH075 manual Group Scan GS Mode

Page 16

UT01913ZZ_1 11/21/03 5:50 PM Page 14

If SCAN is deactivated while in an active channel, the UH075 will stay on that active channel. If no other channels are active, the UH075 will reinstate the starting channel.

Group Scan (GS) Mode

Allows you to monitor a Priority Channel while scanning.

To use GS Mode Scanning, press the os/gs key. GS icon appears on the display.

GS Scanning checks the Priority channel activity regularly.

If GS Scanning is initiated when there are no channels programmed in GS memory, an error tone will be heard and scanning will not start.

If the Priority channel becomes active the radio will stay on that channel for as long as the signal is present. If the received signal ceases, Priority scanning continues after 3 seconds.

If scanning stops on a channel which is not a Priority Channel the UH075 will continue monitoring the Priority Channel for activity while listening to the active one.

To deactivate SCAN, press the scan or PTT .

If SCAN is deactivated while it is turned to an active channel, the UH075 will stay on that active channel. If none of the channels are active, the UH075 will reinstate the Priority channel.

14

Image 16
Contents Operating Guide Lithium ION Battery Pack Warning Waterproof JIS4Contents Features IntroductionIncluded in Your Package Getting Started Mounting the Drop-in ChargerAttaching the Battery Pack Charging the Battery Pack Do not transmit when the UH075 is in the drop-in chargerBattery approx % capacity Battery 100% fullLow Battery Level 1 flashing Empty Battery Power ON/OFF VolumeAdjusting the KEY Beeps OperationRoger Beep Selecting ChannelSquelch To Transmit and Receive Then disappears on the LCDStandard Operation without the aid of a Repeater Station Using a Repeater ChannelOperation with the aid of a Repeater Scanning To Operate UH075 in Duplex ModeExample CH40 becomes active Group Scan GS Mode DROP-OUT Delay Priority ChannelProgramming Scan Channels Choosing a Priority ChannelProgramming Ctcss Code Advanced FeaturesCtcss Scan Operation To activate VOX To De-activate VOXBack Lighting Power SaveKeypad Lock Busy Channel LOCK-OUT BCL MonitorTo activate BCL To use monitorDuplex Mode Simplex Mode UHF Channel & FrequenciesCtcss Codes & Frequencies Freq. Hz Code NoSpecifications GeneralTransmitter ReceiverCharger One Year Warranty WarrantyUniden UH075 UHF CB Radio Controls & Indicators VOXLCD Display UT01913ZZ1 11/21/03 550 PM UT01913ZZ1 11/21/03 550 PM