Uniden UHO45XR manual Busy Channel Lockout BCL, Power- Save

Page 14

. -

OPTION SEnlNGS

 

 

Time Out Timer (TOT)

-

 

,-",

-

 

 

.--L'Lt

.

,-.,

. =-,-,

'-

r

-Lt ,

r

-1- Lt

This option limits the maximum transmission time (in minutes) to conserve battery power. Factory default is set to toO(disabled).

1.Turn off the radio.

2.Press and hold the MODE button while turning ON the radio. The LCD will show "t-O".

3.Press the UP or DOWN keys to select the desired limit (from 1 to 20 minutes).

Busy Channel Lockout (BCL)

[b-oF ) boon

Thisoption prevents transmission while receiving a message. Factory default is OFF.

1.Turn off the radio.

2.Press and hold the MODE button while turning ON the radio.

3.Press the MODE button again until the display reads "b-oF"

4.Press the UP or DOWN buttons to toggle between ON (on) or OFF (oF).

Power- Save

,. . -C

--01p-on

This feature conserves the battery by "powering down" the receiver momentarily when no message is being received. This will NOT cause you to miss messages! Factory default is OFF.

1.Turn the radio OFF.

2.Press and hold the MODE key while turning ON the radio.

3.Press the MODE key until the display reads "P-oF".

4.Press the UP or DOWN buttons to toggle between ON (on) or OFF (oF).

NOTE: To save the new settings simply switch off

I the radio.

14

Image 14
Contents Unid~n Operating this radio Contents UHO45XR Features IntroductionTX/RX lED JU~k~ Batteryinstallation Installing / Removing the Antenna To Charge the BatteriesAdjusting. the volume Turning the unit on I OFFTransmitting a call OPERATION. C. \~Receiving a call Changing ChannelsPrivacy codes Ctcss MonitorBattery Level Indicator Key LockPower- Save Busy Channel Lockout BCLCtcsschannels Troubleshooting Specifications Warranty One-Year limited WarrantyWarranty Procedure for Obtaining PerformanceCommunicationWithVision