Uniden UH054A, UH054L manual Dual Watch, Selecting a Priority Channel

Dual Watch

Dual Watch mode monitors a priority channel and the currently selected channel for a signal. The UH-O54 checks the priority channel for activity every 1.5 seconds.

Selecting a Priority Channel

The UH-O54 is pre- programmed with CHO1 as the priority channel.

However, you can change the priority channel to be any other channel.

Note: When you select a new priority channel, the old priority channel automatically becomes a regular channel.

1. The radio should be in Stand-by mode.

2.Select the new channel (e.g. CHO4)

3.Press and hold the priority button to change the new channel to priority.

nu:

Ut:

MEM

P

You hear a beep and P appears on the LCD.

Dual Watching

Select a channel other than your priority channel. (e.g. CHO1)

You can begin dual watching by simply pressing priority button momentarily.

Notice that the display

toggles between the selected and the priority channel and PRI appears every time the priority channel is checked.

13