Uniden UH-052XR Priority Channel, DROP-OUT Delay, Advanced Features, Programming Scan Channels

Page 15

Programming Scan Channels

1.Select which Scanning Mode you wish to use on the channel

OS or GS Mode

Note: OS is indicated by the absence of the GS icon

2.Select the channel you want to store by pressing [] or []

3.Press and hold [MEM] for 1.5 secs. to store. MEM icon appears and a short tone beep is heard.

4.To remove the channel from Memory, press and hold [MEM] for 1.5 secs. once more. Two successive beeps are heard and the MEM icon disappears.

CTCSS

BCL VOX

OS/GS

DUPLOCK

CTCSS

CTCSS

BCL VOX

OS/GS

DUPLOCK

CTCSS

PRIORITY CHANNEL

The Priority Channel feature allows user to monitor one of 40 channels in the UH-052XR, monitoring it every 1.5secs during Group Scanning.

Choosing a Priority Channel

The starting channel, when Group Scanning is initiated, is always the Priority Channel. To change the priority channel setting while scanning, (eg. PRI Channel is CH17 (476.825 MHz))

a.press [], to select a higher channel (scanning pauses)

or

b. press [], to select a lower channel

DROP-OUT DELAY

While scanning, the UH-052XRstops at a busy channel and receives a transmission. When the received signal is over, the unit will wait for 3 seconds for the return of the signal, otherwise, the radio resumes scanning.

ADVANCED FEATURES

Continuous Tone Coded Squelch System (CTCSS) is a feature that allows a group to talk to each other without hearing other users on the same channel.

NOTE : Uniden discourages the use of CTCSS feature until the Australian Communications Authority (ACA) grants the use of CTCSS on CB frequencies.

12

Image 15
Contents Operating Guide NICKEL-CADMIUM Battery Pack Warning Contents Introduction FeaturesAustralia Technical Support and ServiceIncluded in Your UH-052XR Package Charging the Battery Pack Getting StartedAttaching the Antenna When charging, the CHG icon appears on the display Battery Charge IndicatorSelecting Channel Power ON/OFFVolume OperationSquelch TX appears on the LCD To Transmit and ReceiveUsing a Repeater Channel Scanning To Operate UH-052XR in Duplex ModeGS Scanning checks the Priority channel Activity regularly Group Scan GS ModeProgramming Scan Channels DROP-OUT DelayAdvanced Features Priority ChannelCtcss Scan Operation Programming Ctcss CodeInstalling VOX Headset To activate VOXTo De-activate VOX To use the Call Tones Power SaveTo activate BCL To De-activate BCLTo use monitor Battery Level Display Freq Usage UHF Channels & FrequenciesCtcss Codes & Frequencies Optional AccessoriesReceiver SpecificationsGeneral TransmitterCharger Warranty Australian One Year WarrantyUniden UH-052XR UHF CB Radio Controls & Indicators Ctcss