Uniden UH037SX-4, UH037SX-2 owner manual Otherwise, the radio resumes scanning, DROP-OUT Delay

Page 10

To initiate scanning,

1. Assuming the unit is on CH1 when switched on.

2. Press and hold Channel or for 3 seconds and scanning starts.

3. Press or to cancel scanning.

If Channel or is pressed while the unit is paused on a channel, scanning will be resumed.

DROP-OUT DELAY

While scanning, the UH037SX stops at a busy channel and receives a transmission. When the received signal is over, the unit will wait for 2 seconds for the return of the signal,

otherwise, the radio resumes scanning.

USER LICENSE INFORMATION

The citizen band radio service is licenced in Australia by ACMA Radio-communications (Citizen Band Radio Stations) Class Licence and in New Zealand by MED General User Licence for Citizen Band Radio and operation is subject to conditions contained in those licenses.

9

Page 9 Page 11
Image 10
Page 9 Page 11
Contents UH037SX-2 and UH037SX-4 UHF Radio Transceiver Your Belt ClipsMake sure your radio is off Remove the battery cover Battery WarningBattery Installation Replace the battery coverBelt Clip LOW Battery AlertWater Warning To attach the belt clipAdjusting the KEY Beeps Power ON/OFFVolume Press and hold to turn the Radio OFFBefore you transmit, listen for Press channelDesired channel Activity on the selected channelRange Maximum Range Reduced RangeTo use monitor Automatic Squelch FeatureMonitor Or for 2 seconds or press key onceOperation with the aid of a Repeater DROP-OUT Delay Otherwise, the radio resumes scanningUHF Channels & Frequencies Warranty
Top Page Image Contents