Battery | Icon | Battery Level | Icon | |
Level |
|
|
| |
|
|
|
| |
LEVEL 5 | HIGH | LEVEL 4 | HIGH | |
100% Full | Battery | |||
US | US | |||
|
| |||
|
| Approx.70% |
| |
|
| Capacity |
| |
|
|
|
| |
LEVEL 3 | HIGH | LEVEL 2 | HIGH | |
Battery | Battery | |||
US | US | |||
Approx.50% |
| Approx.20% |
| |
Capacity |
| Capacity |
| |
|
|
|
| |
LEVEL 1 | HIGH | LEVEL 0 | HIGH | |
Low Battery | Nearly Empty | |||
US | US | |||
(10% or Less) |
| (Flashing) |
| |
|
|
|
|
•You can’t transmit if the Battery Indicator shows Level 0
when you press PTT.TXLO HIGH
PTT, an error US• As long as you press
CAUTION tone sounds and TX and CH blink. |
| A |
| ||
| ||
|
• It is possible to receive at Level 0, .
Attach and Remove Belt Clip
To attach:
1. Position belt clip above its receptacle on the upper back side of the radio.
2. Slide the belt clip down into its receptacle until you hear it click. The belt clip is firmly attached.
To remove:
1. Pull up on the locking tab.
2. Slide the belt clip up and out of its receptacle.