Uniden BC9000XLT specifications Ctcss Board installed To speaker Inside Top Cover

Page 46

4.Align the pins on the CTCSS Board with the sockets on the mother board. Make sure they go straight into the sockets.

CTCSS Board installed

To speaker (Inside Top Cover)

The 4 pin socket	is
toward the front of the
scanner.
The 3 pin socket	is
toward the back of
the scanner.	4 pins
the scanner.	3 pins

5.Gently push straight down on the CTCSS Board until the pins

are fully seated in

the sockets.

6.Carefully replace the cover and the five screws.

Note: The tabs on the cover hook under the front part of the chassis.

Image 46

Contents Table of Contents Introduction Where to Obtain More InformationTypes of Communication Included with the BC9000XLT BC9000XLTFeature Highlights Page Base Installation Getting StartedWhat is Scanning? SearchingBank a 000.0000MHz Setting the SquelchON/OFF/VOLUME and Squelch Controls Banks and ChannelsSquelch Volume Using the Rotary Tuner Auto Sort Programming ChannelsChoosing a Programming Method Scan and Numeric Keys Programming By Manual EntryBank a P ch 1 L/O 000.0000MHz Bank a P ch 1 L/O 482.7625MHz Bank a Scan, Numeric Keys, and Rotary Tuning ControlsBank a P ch Programming With the Rotary TunerKHz ch 52 AM 123.7750MHz Search, Scan, Numeric, and Bank Keys Rotary Tuning ControlsProgramming with Search SRC NFM 12 KHz 450.3750MHz SRC NFM 12 KHzKHz ch 53 NFM 450.3875MHz Bank D Bank H Ch200 000.0000MHz 450.3875MHzProgramming With Auto Store NFM 450.0000MHz NFM 810.0000MHz5KHz STOch Bank1234567890 810.1125MHZTransferring a Programmed Frequency Deleting a Programmed FrequencyBank D ch 86 854.8625MHz Bank D ch 86 L/O 000.0000MHz Bank D 450.3875MHzBank D 855.9125MHz Enter Bank or ch 855.9125MHzBank a 000.0000MHz Programming Channels with Alpha Characters56789 /& ch Lmnopqrstu ch From 1 toSelect Alpha or Ctcss Select chan 8 from 1 to Bank Local PoliceTo Delete Alpha Characters 56789 Ocal PolicePress e to store the changes Scan, Mode, Numeric, and Bank Keys Scan ModeScanning All Programmed Channels and Banks Bank Abcdefghij Sca n Bank a ch 8 855.9125MHzBank Abcdefghij Sca n Turning Banks on or OFFSca n Locking Out a Channel Scan, Mode, and Numeric Keys Rotary Tuning ControlsLocking Out Channels Bank E H10 853.1125MHzUnlocking a Channel Bank a P ch 1 482.7625MHzUnlocking All Channels Moving the Priority Channel Using Priority ScanScan, Mode, and Numeric Keys, and Rotary Tuning Controls Bank a ch 9 325.0500MHz Bank a P ch 9 325.0500MHzSearch Mode Beginning a SearchSearch Keys, and Rotary Tuning Controls Scrolling Frequencies During a SearchUsing Search Delay Using Turbo SearchMode Keys SRC NFM 5 KHzLocking Out Frequencies Unlocking a Frequency0KHz 47.2250MHz Unlocking All FrequenciesBirdies Status, Search, Mode, Numeric and Special Function Keys Additional Scanner FeaturesUsing Data Skip Scanning Weather ChannelsKHz ch230 .0KHz Changing the Frequency Step0KHz ch 230 NFM 48.0000MHz 48.0000MHzSRC WFM 5.0KHz Setting the Signal ModeStatus, Numeric and Special Function Keys SRC WFM 5 KHzUsing Signal Attenuation Bank C ch Using Count to Monitor Channel ActivityScan, and Mode Keys Count01P ch 1 482.7625MHzCount 01P ch 1 482.7625MHz Displaying Bank Memory Status Bank E 854.9800MHzBank E P**-*--*L L L Using Auto Recording Record ch 1 482.7625MHzBank C 5KHz Record ch 1 482.7625MHz Bank a P ch 1 482.7625MHzBank C 854.2875MHz Bank C ch Viewing Scanner Status Information0KHz ch 10 HI-CUTOFF Bank C000.0 0KHz NFM 46.0550MHz 0KHz chStatus and Special Function Keys Using Hi-CutDisplay Light Ctcss Operation Installing the Ctcss BoardLift Ctcss Board installed To speaker Inside Top Cover Select Alpha or Ctcss Using CtcssKHz ch 72 854.2875MHz Bank C 854.2875MHz Select chanFrom Select chan 72 from 1 to From 1 toCtcss Tone Frequencies Select chan 72 from 1 to82.5 General Use Care and MaintenanceCleaning LocationTroubleshooting Scanner won’t workOptional Accessories and Replacement Parts Specifications BC9000XLT Precautions BC9000XLT Controls One Year Limited Warranty