Deleting a Channel from Memory
1Select the channel to delete from memory by pressing the s or t button.
2 Press and hold the MEM button for 2 seconds.
MEM disappears from the display.
Scanning
1 To begin scanning the programmed channels, press the SCAN button. SCAN and TRIPLE appear on the display.
2To stop scanning, press the SCAN button once more. SCAN and TRIPLE disappear from the display.
•Scanning starts from the lowest to highest channel and stops when it finds an active channel. It remains on that channel until the transmission ends, then resumes scanning after a 2 second delay period.
•When in the scan mode, the unit automatically activates the Triple Watch feature. To deactivate Triple Watch from the scanning mode, press TRI button. TRIPLE disappears from the display.
15
Atlantis 260CE.indd 15 | 6/3/08 4:51:13 PM |