Package Contents, Gmrs License | Uniden GMR2059-2CK instruction

GMR2059-2CK

• 15 GMRS / 7 FRS Channels		• Power Boost Button for
• 142 Privacy Codes			Maximum Range
	(CTCSS Tone and DCS Code)	• Battery Charger
• Up to 20 Mile Range*		• Battery Level Meter
• Scramble		• Channel Monitor
•	Internal VOX Circuitry	•	Channel Scan
•	5 Selectable Call Tone Alerts	•	Keypad Lock
• Backlit LCD Display		•	DC IN 9V Jack

•Optional Headset Accessories

•Headset Jack

•Roger Beep

*Range may vary depending on environmental and/or topographical conditions.

GMR2059-2CK RADIO

1	Antenna	15	Receive Indicator
2	PTT (Push-To-Talk) Button	16	boost Indicator
3	Power Boost Button	17	Call Indicator
4	Monitor Key	18	Scan Indicator
5	Menu Key	19	Channel Indicator
6	Channel Tone/Scan Key	20	Hi Power Indicator
7	Speaker	21	Low Power Indicator
8	Up/Down Button	22	Transmit Indicator
9	Headset Jack	23	Volume Setting Indicator
10	Power On/Off Key	24	Keypad Lock Indicator
11	Call Key	25	VOX Indicator
12	Microphone	26	Privacy Code Indicator
13	DC IN 9V	27	Scramble Indicator
14	Battery Level Meter	28	Charging Contacts

Congratulations on your purchase of the Uniden GMR2059-2CK (General Mobile Radio Service) radio. This lightweight, palm-sized, radio is a state-of-the-art device, equipped with many valuable features. Use it at sporting events, to stay in contact with family and friends, hiking, skiing, outdoors, or in a neighborhood watch for vital communication.

PACKAGE CONTENTS

Your package contains two GMR2059-2CK radios, two rechargeable NiMH battery packs (#BP38), two AC adapters (#AD-0001), two charging cradles (#RC1202), two belt clips and this reference guide. You can operate the unit using the rechargeable NiMH battery pack or 4 AAA alkaline batteries (not included).

To order the following optional accessories, visit our web site at www.uniden.com or call 1-800-554-3988 during regular business hours. Use only Uniden accessories.

•NiMH Battery Pack - #BP38

•Charging Cradle - #RC1202

•Headset - #HS910/HS915/ZA-133

•AC Adapter - #AD-0001

•DC Adapter - #DC-1002

GMRS LICENSE

The GMR2059-2CK radio operates on the General Mobile Radio Service (GMRS) frequencies when using Channels 1-7 and channels 15-22. You must have a GMRS license issued by the Federal Communications Commission to legally use these channels.

For licensing information and application forms, visit the FCC online at: www.fcc.gov/wtb/uls or call the FCC hotline at 1-800-418-3676. If you have any questions, you can contact the FCC direct at 1-888-225-5322. No license is required for operation on channels 8-14 or operation on any channel in Canada.

INSTALL THE BATTERY

Your GMR2059-2CK radio uses a supplied NiMH battery pack or 4 AAA alkaline batteries (not included).

To install the NiMH battery pack:

1)Make sure your radio is OFF.

2)Remove the battery compartment door by pressing the tab at the bottom of the compartment door, and remove the cover.

3)Install the NiMH battery pack into the battery compartment applying the battery contacts to the lower charge contacts. Be certain to follow the instructions written on the label on the battery pack. Installing the battery pack incorrectly will prevent the unit from operating.

4)Replace the battery compartment door.

BATTERY LEVEL AND

LOW BATTERY ALERT

This unit has a battery level meter on the display to indicate the status of the batteries. When the battery in the unit is low, the battery level meter

icon flashes. Recharge the NiMH battery pack immediately or, if you are using the alkaline batteries, you must replace the alkaline batteries in order to continue using the radio.

Warning! To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden accessories specifically designated for this product.

CHARGING THE RADIO

If you use the rechargeable NiMH battery pack, two GMR2059-2CK radios can be charged directly or by using the supplied charging cradle.

Charge by Using the Radio

1)Connect the DC adapter’s plug to the radio’s DC IN 9V jack and plug the other end into your vehicle's accessory power outlet.

2)Charge the battery pack for 16 hours until the battery indicator stops flashing.

Using the Charging Cradle

1)Connect the AC adapter’s plug to DC IN 9V jack and plug the other end into an AC outlet.

2)Set the charging cradle on the desk or tabletop, and place the radio in the charging cradle with the keypad facing forward.

3)Make sure that the LED illuminates. Charge the battery pack for 16 hours and remove the radio from the charging cradle after charge.

Note:

•For charging batteries directly without the cradle, use only the #DC-1002 Cigarette Lighter Adapter cord, available from www.Uniden.com.

Other power cords could damage your radio.

•DC IN 9V Jack of the radio is for charge only. Be sure to install the battery before charging.

•Use only the supplied battery, AC or DC adapter or approved accessories from Uniden.

•Charge time may vary depending on the battery life remaining.

•Do not recharge alkaline batteries. Doing so can create a safety hazard or damage the radio.

•For fastest charging, turn off the radio before charging.

•Battery must be installed for operation, even from external power.

•If battery Power is low, you cannot operate the radio even using external power. Allow the batteries to charge before using. If you try to transmit while power is low, the radio will automatically turn off.

USING THE RADIO

In order to get the most out of your new radio, read this reference guide completely before attempting to operate the unit.

Turning the Radio On and Adjusting the Volume

1)Press and hold the key to turn the radio ON, and increase the speaker volume by pressing the ▲ button. To decrease the volume, press the ▼ button.

2)Press and hold the key again to turn the radio OFF.

Adjusting the Sound (Key Beeps)

Your radio emits a beep each time one of the keys (except for the PTT and Power boost button and call key) is pressed. To turn this sound OFF, press and hold the call key while turning ON the radio. Repeat this step to turn the sound ON.

Choosing a Channel

Your radio has 22 channels and 142 Privacy codes you can use to talk to others. In order to speak to someone, each of you must be set to the same channel and Privacy Code.

To choose a channel:

With the radio in "Normal" operating mode press the chan tone/scan key and press the ▲ or ▼ button to increase or decrease the channel number displayed.

Note: Channels 1-7 and 15-22 have a typical range of up to 20 miles by pressing the Power boost button. hi is displayed when you select a GMRS channel, and lo is displayed when you select a FRS channels.

Choosing a Privacy Code

Each of the channels 1-22 may have any one of the codes, OFF or 1-142 selected. Code oF (OFF) indicates no Privacy Code selected and your radio can receive a signal regardless of the code settings of the transmitting radio.

1)Press chan tone/scan in channel select mode. The privacy code indicator will flash.

2)Press the ▲ or ▼ button to increase or decrease the code number displayed. You can also select oF (OFF) at this stage.

3)Press chan tone/scan to exit the Menu.

Channel Scan Feature

Your GMR2059-2CK radio has a channel scan feature that allows you to easily scan all 22 channels. When an active channel is detected, the radio pauses on that channel until the channel is clear. Then after a 2 second delay, the radio continues scanning. Pressing the PTT and Power boost button while the scan is paused on a channel allows you to transmit on that channel.

To turn ON channel scan:

Press and hold the chan tone/scan key until the scan... icon is displayed. The channel number on the display changes as the radio rapidly cycles through the channels.

To turn OFF channel scan:

Press the call, PTT, Power boost or menu key, or press and hold the chan tone/scan key for 2 seconds.

Talking on Your Radio

To talk to others using the radio:

1)Press and hold the PTT button and speak in a clear, normal voice about 2-3 inches away from the microphone. While you are transmitting, the icon appears on the display. To avoid cutting off the first part of your transmission, pause slightly after pressing the PTT button before you start talking.

2)When you have finished speaking, release the PTT button. You can now receive incoming calls.

While receiving, the icon appears on the display.

Note: When you press the Power boost button,

boost and icon appear on the display. The radio will transmit Maximum power when a GMRS channel is selected. After one minute past when the boost transmission is established, the transmission stops automatically, and you will hear a boost time out error tone.

Warning! The typical range of GMRS channels can be boosted only with NiMH batteries. When the Power boost key is pressed while using alkaline batteries, hi icon appears instead of boost icon and the range is not boosted.

Monitor Mode Feature

Your GMR2059-2CK radio allows you to listen for weak signals on the current channel at the press of a key.

To turn ON the Monitor Mode:

•For brief listening, press mon button. The icon blinks.

•Press and hold mon button for 2 seconds untill two beeps sound for continuous listening. The receiver circuit stays open, letting both the noise and weak signals to be heard.

To turn OFF Monitor Mode:

Press mon button to return to "Normal" mode,

and the icon stops blinking and disappears.

Navigating through the Menu

To access the advanced features of the GMR2059- 2CK, your radio has a Menu function.

Normal Scramble VOX Level Call Tone Key Lock Normal

ON-OFF OFF, 1-5

1-5

ON-OFF

1)To enter the Menu, press the menu key.

2)Additional presses of the menu key advances you through the Menu until exiting to "Normal" operating mode.

3)Other methods of exiting the Menu function are:

a.Press and hold the key again.

b.Press the PTT, Power boost, mon, call or chan tone/scan key.

c.Wait 10 seconds until the unit automatically returns to “Normal” mode.

Setting Scramble

Scramble feature allows you to make a private conversation. No one listening to your conversation can understand what you are talking about. Be sure that your party also sets their radio to the scramble feature.

Note: Scramble only operates on FRS channels 8-14.

To set Scramble:

1)Enter the Menu.

2)Select on using ▲ or ▼ button.

Voice Operated Transmission

Your GMR2059-2CK radio is equipped with a user selectable Voice Operated Transmitter (VOX) that can be used for automatic voice transmissions. The VOX feature is designed to be used with a headset with a microphone. Transmission is initiated by speaking into the remote microphone instead of pushing the PTT and Power boost button.

To select the VOX level:

1)Enter the Menu. Advance through the Menu until the vox icon appears on the display. The current level (OFF, 1-5) will be indicated. Level oF (OFF) disables VOX, while levels 1-5 set the sensitivity of the VOX circuit.

2)Press either the ▲ or ▼ button to the desired VOX sensitivity level. Use level 1 for increased sensitivity to voice in normally quiet environments, and use a higher level to reduce undesired activation in very noisy environments.

Transmitting a Call Tone

Your GMR2059-2CK radio is equipped with 5 selectable call tones that are transmitted when the call key is pressed.

To select a call tone:

1)Enter the Menu. Advance through the Menu until the call icon is shown on the display. The current call tone number (1-5) is indicated.

2)Press the ▲ or ▼ button to increase or decrease the number to the desired call tone. Each tone will be heard through the speaker.

To transmit the selected call tone, press the call key. The selected tone will automatically be transmitted for a fixed length of time. Call Tone will be cancelled when the PTT and Power boost button is pressed.

Key Lock

To lock the keypad:

1)Enter the Menu. Advance through the Menu until

the icon appears on the display. The current Key Lock status oF (OFF) blinks on the display.

2)To switch the Key Lock mode from oF (OFF) to on, press the ▲ button.

3)To confirm the setting, press the menu key. The radio returns to the "Normal" mode.

Note: If you exit the setting mode before confirming your selection by pressing the menu key, the Key Lock setting will be set to oF (OFF).

To unlock the keypad:

1)Press and hold the key to turn the radio OFF.

2)Press and hold the key again to turn the radio ON. The keypad is unlocked.

Automatic Power Save Feature

Your GMR2059-2CK radio has a unique circuit designed to dramatically extend the life of the bat- teries. If there is no transmission nor an incoming call within 3 seconds, your radio switches to the Power Save mode. The radio is still able to receive transmissions in this mode.

LCD Backlight

The LCD Backlight automatically turns ON when any key (except the PTT and Power boost button) is pressed. The LCD display illuminates for 10 sec- onds before turning OFF.