Uniden DSS7915+1 owner manual Registering DSS7805WP Compatible Handsets, Resetting the Handsets

Registering DSS7805WP Compatible Handsets

) Disconnect the base AC adapter.

2)While holding the [find hs], reconnect the AC adapter until the charge LED starts blinking.

3)On the handset, press and hold [#] until you hear a beep.

4)While the handset is registering, HANDSET REGISTERING will appear in the LCD. When REGISTRATION COMPLETE is displayed; the handset has been registered to the base. If REGISTRATION FAILED appears, please try these steps again.

Resetting the Handsets

If you want to register a handset to a different base or replace a handset with another one, you must first clear the existing registration data. To clear, please follow these steps:

) Press the MENU soft key. Select the DEREGISTER HS submenu.

2)DEREGISTER HS? appears. Move the cursor to select YES. Press the OK soft key.

Or

>GIKUVGT*5! ;GU

0Q

$#%- &'.'6' 1-

) From the handset, press and hold [ ] and [#/>] for more than 5 seconds. You will hear a confirmation tone, and DEREGISTRATION COMPLETE appears.

After resetting the handset, place the handset to the base to register. You must re-register the handset before you can use it. (See Registering DSS7905 Accessory Handset section on page 23 for registration instructions.)

24