Uniden DSS8900 Series, DSS8905 manual Charging the Accessory Handset, Charge LED

Page 5

Charging the Accessory Handset

The handset is powered by a rechargeable battery pack that automatically recharges when the handset is placed in the charging cradle.

Use only the Uniden AAD-600S(M) AC adapter with the charging cradle.

Place the cord

 

through the molded

Connect the AC adapter to a

wiring channel.

standard 240V AC wall outlet.

 

Place the handset in the charging cradle with the display facing forward.

Make sure that the

charge LED

illuminates when the handset is seated.

What if the charge LED doesn’t light up?

Reseat the handset; make sure the

contacts on the bottom of the handset are lined up with the contacts in the cradle.

Check the AC adapter connection. Make sure you are not using an outlet that’s controlled by a wall switch.

Charge your handset at least 15 to 20 hours before using your new handset for the first time.

4

Image 5
Contents DSS8905 Terminology Used in this Manual WelcomeChecking the Package Contents Compatible Bases Installing the Accessory HandsetInstalling the Belt Clip Installing the BatteryCharge LED Charging the Accessory HandsetTo register to a DSS8900 series base Installing the Optional Headset Registering the HandsetResetting the Handset Without the Base Resetting the HandsetParts of the Handset Using the InterfaceReading the Display Entering Text from Your Handset Using the Four-way Function KeyUsing the Handset Menus Number of times key is pressed Making and Receiving Calls Using Your Accessory HandsetAdjusting the Volume Using Call Waiting Using Caller ID and Call WaitingUsing the Phonebook Adjusting the Audio Tone Privacy ModeRedialing a Number Muting the Ringer One Call OnlyPut a call on hold Using Hold, Conference, Transfer and IntercomScreening Calls Accessing Your Answering SystemMaintenance Accessing VoicemailBattery Life Low Battery AlertClean the Battery Contacts Battery Replacement and HandlingMemo Memo Memo DSS8905 One Year Limited Warranty