Getting Started
Installing Your Phone
Charge the Battery
1. Unpack the handset, battery pack, and battery cover. If you need to remove the battery cover, press in on the notch and slide the cover down and off.
2.Line up the battery connector with the jack inside the handset. (The battery connector will only fit one way.)
. Push the connector in until it clicks into place; tug gently on the wires to make sure the battery pack is securely connected.
4. Replace the battery cover and slide it into place.
. Connect the AC adapter to the AC IN 8V jack on the base. Set the plug into the notch.
6.Plug the other end of the adapter into a standard 120V AC outlet.
7.Place the handset in the base with the display facing forward. The display on the handset should light up; if it doesn’t, reseat the handset or try plugging the AC adapter into a different outlet.
Charge the handset completely (about 15 hours) before using it.
Connect the Telephone Cord
Use the telephone cord to connect the TEL LINE jack on the base to a standard telephone wall jack.
Test the Connection
1.Pick up the handset from the cradle and press Talk. You should hear a dial tone, and the display should say Talk.
If you don't hear a dial tone or the display says Check Tel Line, check the connection between the base and the phone jack.
2.Make a quick test call. (Press End to hang up.)
If you keep hearing a dial tone, try changing to pulse dialing mode.