Midland Radio P-20 owner manual Technical Specifications General, Transmitter, Channel Frequencies

Page 15

Owner’s Manual for the P-20 (Itinerant Radio)
TECHNICAL SPECIFICATIONS*
GENERAL
Frequency range	464/467/469 MHz
Channels	10
Modulation type	FM
Antenna impedance	50 Ohm
Loud-speaker..........………..................................................................8 Ohm 0.5W

Microphone...................................................................................…electronic type

Power supply	3 AA Ni-cads or Alkaline(3.6/4.5VDC)
RECEIVER	0.35µV
Sensitivity at 12dB Sinad	0.35µV
Selectivity	50 dB

Squelch range...................................................................................…...Automatic

Audio output power	0.25W @ 8 Ohm (10% distortion)
Distortion at 500 mV	7%
Audio frequency response	400-2400 Hz

TRANSMITTER

RF Output Power...........................................….......nominal 1000 mW @ 4.5VDC

Frequency Tolerance			0.00025%
Harmonic Suppression				more than 50 dB
Modulation				FM +/- 2.5 kHz
*Specifications are nominal and subject to change
CHANNEL FREQUENCIES

	01=464.500	05=467.850	09=469.500 /

	02=464.550	06=467.875	464.500

	03=467.7625	07=467.900	10=469.550 /

	04=467.8125	08=467.925	464.550

	http://www.midlandradio.com	Page 15 of 16

Image 15

Contents Page Table of Contents Tips for Getting the Most from Your P20 Optional Accessories for Your RadioWarranty consideration FCC Licensing InformationPage Quick USE Instructions PreparationCharging the Batteries Belt ClipRange of UHF Radios Power Save CircuitDisplay Symbols Cold Temperature Ctcss Code Symbol Indicates Ctcss tone is activeUnlocking the Controls Features and Location of ContolsTurning the Radio on or OFF Locking the ControlsUsing the Monitor Function Adjusting the VolumeAdjusting the Squelch Using the Call FunctionDual Watch Activating Scan FunctionsBusy Channel Scan Open Channel ScanTo activate the DCS Codes Activating Privacy CodesTo activate Ctcss codes DCS CodesOperating the Hands Free VOX Voice Operated Transmit Resetting the RadioAccessing Memory Channels Setting Remote Monitor ModeTo exit the remote monitor mode Setting Memory ChannelsTroubleshooting Problem Solution Always Dispose of Batteries Properly Care of Rechargeable NI-CAD BatteriesTechnical Specifications General TransmitterChannel Frequencies Midland Radio Corporation