Icom IGM1600 instruction manual HM-125 descriptions Attachment, Alligator-type clip

Page 27

 

9

OPTIONAL SPEAKER-MICROPHONE (FOR ON-BOARD USE ONLY)

■ HM-125 descriptions

■ Attachment

 

Alligator-type clip

To attach the speaker-mic.

Insert the speaker-mic connector onto [MIC/SP] connector and carefully screw it tight, as shown in the diagram below. Be careful not to cross thread the connection.

to your shirt or collar, etc.

PTT switch

Transmits when push. Receives when release.

Microphone

Speaker

Set the triangle mark to the front side.

Detaching:

Pull up the cap in the direction of the arrow to detach it.

Attaching:

Attach the cap in the direction of the arrow completely.

8

9

NEVER immerse the connector in water without connecting with the transceiver. If the connector becomes wet, be sure to dry BEFORE connecting it to the transceiver.

NOTE: The microphone is located at the top of the speaker-microphone, as shown in the diagram above. To maximize the readability of your transmitted signal (voice), hold the microphone approx. 2.5 cm (1 inch) from your mouth, and speak in a normal voice level.

CAUTION: Attach the speaker-microphone’s connector securely to prevent accidental drop- ping, or water intrusion into the connector.

IMPORTANT: KEEP the transceiver’s [MIC/SP] connector cap attached when the speaker-microphone is not in use. Water will not get into the transceiver even if the cover is not attached, however, the terminals (pins) will become rusty, or the transceiver will function abnormally if the con- nector has become wet.

22

Page 26 Page 28
Image 27
Page 26 Page 28
Contents IGM1600 Safety Training Information Word Definition Rwarning Clean the Transceiver Thoroughly with FreshPrecaution Table of Contents Radio licenses Operating RulesPriorities PrivacyHandstrap Supplied Accessories and AttachmentsSupplied accessories AttachmentsTo remove the battery pack Battery packFront, top and side panels Panel Description0SQUELCH Switch Sqlmoni 1PTT Switch PTTFunction display Indication 0CALL Channel IndicatorCall channel Basic OperationChannel selection ChannelBasic Operation Receiving and transmittingCall channel programming Adjusting the squelch levelBacklighting function Signal strength indicatorLock function Monitor functionSET Mode SET mode programmingSET mode operation Backlighting function bL SET mode itemsMonitor switch action Sq Beep tone function bPSelf check function SC Auto power save function PSBattery voltage indicator bt Signal strength indicator SlSquelch sensitivity function SS SET Mode List VOX delay dL Available for on-board use onlyBP-234 Battery Pack Recycling information Battery Charging for ON-BOARD USE onlyBattery charging Battery cautionsCharging connections AD-109 installation Optional battery chargersRapid charging with the BC-121N+AD-109 Rapid charging with the BC-119N+AD-109Detachment MB-86 contentsOptional Swivel Belt Clip AttachmentAlligator-type clip HM-125 descriptions AttachmentTX/RX Channel List for Survival OperationProblem Possible Cause Solution TroubleshootingReceiver SpecificationsGeneral TransmitterOptions Battery PacksKamiminami, Hirano-ku, Osaka 547-0003, Japan

IGM1600 specifications

The Icom IGM1600 is a sophisticated GMRS (General Mobile Radio Service) transceiver designed for both recreational and professional use. It stands out in the world of two-way communication devices due to its robustness, user-friendly interface, and a host of exceptional features that enhance the user experience.

One of the standout characteristics of the IGM1600 is its strong transmission power, providing a maximum output of 5 watts. This power enables it to cover a wide communication range, ensuring reliable connections even in challenging environments. The device is equipped with 22 GMRS channels and features 121 privacy codes, allowing users to find a clear channel and minimize interference from other radio users.

The IGM1600 employs advanced digital processing technologies, which enhance audio quality and reduce background noise. This digital innovation ensures that conversations remain clear and intelligible, even in loud environments. Additionally, the dual watch function allows users to monitor two channels simultaneously, providing flexibility and improving situational awareness.

Another notable feature of the Icom IGM1600 is its rugged design. It has an IP67 rating for water and dust resistance, making it ideal for outdoor use in various weather conditions. This durability extends the life of the device, making it a sound investment for those who require reliable communication tools for activities such as camping, hiking, or even in professional fields like construction and event management.

Moreover, the IGM1600 includes built-in NOAA weather channels, providing users with real-time weather updates. This feature is especially beneficial for outdoor enthusiasts who need to stay informed about changing weather conditions. The device also features a large, easy-to-read LCD display, enabling users to quickly access settings and channels without fumbling under pressure.

The ergonomic design of the IGM1600 ensures comfort during extended use. The intuitive controls facilitate ease of operation, making it an excellent option for both beginners and seasoned users. Battery life is also impressive, with a rechargeable battery pack that supports extended use, further enhancing its practicality for long trips or work shifts.

In summary, the Icom IGM1600 is a powerful and versatile GMRS transceiver loaded with features that cater to a wide range of users. Its robust design, advanced technology, and user-friendly interface make it a leading choice for reliable, high-quality communication. Whether for recreational activities or professional needs, the IGM1600 ensures users stay connected when it matters most.
Top Page Image Contents