Model NT3 Series
®
TROUBLESHOOTING GUIDE
| PROBLEM | SOLUTION |
| No Power | - Check battery installation and/or replace batteries |
|
|
|
| Cannot Receive | - Confirm the radios have the same channel. |
| Messages | - Make sure that you are within range of the other |
|
| transceivers. |
|
| - Buildings and other structures may interfere with |
|
| your communication. |
|
| (See ABOUT RANGE on Page 8) |
|
|
|
| Radio is not responding | - Make sure key lock is not on. See "Keypad Lock" |
| to button presses | (Page 10). |
|
| - Radio might need to be reset. Turn radio off then |
|
| on. |
|
|
|
| Display is dim | - Recharge or replace batteries. |
|
|
|
| Charger not functioning | - Ensure the outlet where the charger is plugged |
|
| into is functioning properly. |
|
| - Check that the battery pack is installed in the |
|
| radio properly. |
|
|
|
USE AND CARE
1.Use a soft damp cloth to clean the radio
2.Do not use alcohol or cleaning solutions to clean the radio.
3.Do not immerse the radio in water.
4.Dry the radio with dry
5.Turn off the radio and remove the batteries during
If you have a problem which you believe requires service, please call first and speak with a service technician. Many problems can be remedied over the phone without returning the unit for service.
Page 13 |
| www.midlandradio.com |