Fisher-Price N3216 manual Problems & Solutions, Problem Solution

Page 15

Problems & Solutions

 

 

Problem

Solution

You hear static or buzzing

Receiver is out of range of transmitter. Move receiver closer to transmitter.

 

Note: Range varies depending on surrounding conditions such as noise

 

levels, physical obstructions and signal interference.

 

 

 

Transmitter power is off. Turn transmitter power on.

 

 

 

Channel switches are on different channels. Make sure channel switches

 

on both transmitter and receiver are set to same channel.

 

 

 

Loose power cord connection and transmitter power is off. Check

 

transmitter power cord plug-to-outlet connection.

 

 

 

No power to wall outlet and transmitter power is off. Make sure light

 

switch that controls power flow to wall outlet is on.

 

 

 

Power is off because circuit breaker for room is off. Make sure house

 

fuses and circuit breakers are on.

 

 

Receiver power/low battery

Receiver power is off. Turn receiver power on.

indicator does not light

 

Batteries in receiver are weak or dead. Replace all batteries with three,

 

 

alkaline “AAA” (LR03) batteries or use AC adaptor as power source.

 

 

 

Power is off because circuit breaker for room is off. Make sure house

 

fuses and circuit breakers are on.

 

 

 

No power to wall outlet and power is off. Make sure light switch that

 

controls power flow to wall outlet is on.

Receiver power/low battery

Batteries in receiver are weak or dead. Replace all batteries with three,

indicator turns orange

alkaline “AAA” (LR03) batteries or use AC adaptor as power source.

 

 

Transmitter power indicator does

Transmitter power is off. Turn transmitter power on.

not light

 

Loose power cord connection and transmitter power is off. Check

 

 

transmitter power cord plug-to-outlet connection.

 

 

 

No power to wall outlet and transmitter power is off. Make sure light

 

switch that controls power flow to wall outlet is on.

 

 

 

Power is off because circuit breaker for baby’s room is off. Make sure

 

house fuses and circuit breakers are on.

 

 

You can hear conversations or

There is signal interference due to other nursery monitors on same

sounds from other homes

channel or cordless telephone use. Change channel switches on both

 

transmitter and receiver to eliminate source of interference.

Hint: If, after checking all of these solutions, you believe that your transmitter power cord or AC adaptor are damaged, please contact Fisher-Price®.

15

Image 15
Contents N3216 Page For proper setup and use, please read these instructions Features Features Antenna AssemblyReceiver Battery Installation Optional Power Button Testing Sound ReceptionOn/Off/Volume Dial Power/Low Battery Indicator If loud sounds are transmitting Setup & Use Press transmitter power button to turn power on Setup & Use Setup & Use Problem Solution Problems & SolutionsCare One 1 Year Limited Warranty