Battery Installation

9V x 2 (6LR61)

•Locate the battery compartment on the back of each walkie talkie.

•Loosen the screw in each battery compartment door. Remove each battery compartment door.

•Snap one 9V (6LR61) alkaline battery into each walkie talkie.

Hint: We recommend using alkaline batteries for longer battery life.

•Replace each battery compartment door and tighten each screw.

•If the toy begins to operate erratically, you may need to reset the electronics. Turn the power/ volume dial off and then back on.

•When sounds from this toy become faint or stop, it’s time for an adult to change the batteries.

Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for recycling advice and facilities (Europe only).

Battery Safety Information

In exceptional circumstances, batteries may leak ﬂ uids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:

•Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).

•Insert batteries as indicated inside the battery compartment.

•Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of product in a ﬁ re. The batteries inside may explode or leak.

•Never short-circuit the battery terminals.

•Use only batteries of the same or equivalent type as recommended.

•Do not charge non-rechargeable batteries.

•Remove rechargeable batteries from the product before charging.

•If removeable, rechargeable batteries are used, they are only to be charged under adult supervision.