Midland Radio LXT480 Series owner manual Battery Installation, Installing the Belt Clip

BATTERY INSTALLATION

Your LXT480 Series radio operates with either 4 AAA alkaline batteries or an optional NiMH battery pack. The belt clip should be removed (see below) to ease installation or removal of the batteries. To install the batteries:

1.With the back of the radio facing you, remove the belt clip (see diagram below) for easy access, then remove the Battery Cover by pressing down on the top center and sliding it down from the radio.

2.Insert 4 AAA batteries observing the polarity as shown. Installing the batteries incorrectly will prevent the unit from operating or may damage the unit.

3.Return the Battery Cover by sliding it up on the radio. Replace the belt clip, making sure it locks into place.

BELT CLIP

LOCK TAB

BATTERY

COMPARTMENT

BATTERY

COMPARTMENT

COVER

Press here and push down to open

BELT CLIP

LATCH

INSTALLING THE BELT CLIP

To install the BELT CLIP, slide the clip up into the slot on the back of the radio until the BELT CLIP LATCH clicks. To remove the BELT CLIP, press the LOCK TAB up, then gently pull the belt clip down toward the bottom of the radio.